DD-WRT Router Login Process

DD-WRT Router Login Process

Login into a DD-WRT Router

If your router has a fresh install of DD-WRT open source firmware, the next important thing is to log into the router. Logging into the router will help you have access to more features that the firmware has to offer.

Otherwise, failure to make use of the additional features may limit you from making maximum use of your router, not forgetting the risk of various threats to the security of your network. Maybe you are wondering how you’ll go about logging to the router.

Fortunately, the login process is a piece of cake; in fact with basic information provided here, even a router novice can do it swiftly.

A successful access to the extra features requires you to have the default details for Login into a DD-WRT Router firmware.

However, not everyone is aware of the default details. Maybe you aren’t even aware how the details look like or where to find them. If that’s the case, there’s no need for you to worry.

We are here to make life easy for you. We’re going to guide you on how to establish the login details as well as helping you on how to use the details to gain access to your DD-WRT account. Besides, you learn some of the essential things you need to do once you’re logged in.

DD-WRT Router Login Methods

There are two methods you can use to Login into a DD-WRT Router. You can either opt to use graphic user interface (GUI) browser method or telnet method.

Logging in using graphic user interface browser.

Just like it is with whichever router which uses a browser, logging in to a DD-WRT router is simply a breeze. Any browser can be used for logging in to the router.

Here are the steps that you should follow to login into a DD-WRT router:

  • Step one: Open your preferred web browser
  • Step two: Type in your router’s IP address on the web browser. (You’re going to see more here regarding the IP address of a DD-WRT)
  • Step three: Key in the password and the username of your router in the dialog box that will pop up after entering the IP address (Don’t worry; you’ll see more about the username and the password here).
  • Step four: You shall be able to access the web-based management of your router once you are successfully through with step three.

 

Logging in using telnet

You can successfully Login into a DD-WRT Router in case your computer has enabled telnet as well as Secure Socket Shell (SSH) commands. You can use these commands to access the additional features of DD-WRT.

But how do you go about it? Here’s the answer.

Start with opening a command prompt, after which you should key in the word “telnet” followed by the IP address of your router enclosed in brackets. Once you are done with that, the prompt will lead you to another box where you are supposed to type the username as well as the password of your router.

By default, the username of a DD-WRT router is the word “root”. You should key in this default username regardless of whether you had previously changed the username or not.

DD-WRT router’s default IP address

You have to be aware of the IP address of your router for you to access it. DD-WRT’s IP address is most of the time 192.16.1.1. However, you will need to go an extra mile and look for ‘Default Gateway’ which is on your PC’s ‘ipconfig’ if the former doesn’t help.

Username and Password of A DD-WRT Router by Default

Just like the majority of the router firmware, DD-WRT comes with a certain username as well as a password by default during its initial installation.Normally, the default username of a DD-WRT router is the word ‘root’ as ‘admin’ act as its password by default. You’ll be in a position log into your router upon entering these details correctly. This is applicable during the initial login after a fresh DD-WRT install.

You can change the above password and username to the ones that you are comfortable with upon logging into the router. It is vital to write the password and the username somewhere that you refer to in case you don’t remember them.

Failure to do so, you will be prompted to hard-reset your router in case you forget the password and/or username. The hard reset will restore the router to its factory settings.

 

Securing Your Router

Securing your router should be one of your priorities once you login into it. Change of the default password and username is one of the most effective ways of keeping your router secure. Particularly, the approach is paramount in case the router is accessible remotely.

Besides, you can enhance the security of your router by keeping the DD-WRT firmware up to date all the time as well as enabling the HTTPS for the connections to your network’s administrators.

Other approaches include the use of WPA2 for encrypting your wireless connections and maintaining a strong router password.

1 thought on “DD-WRT Router Login Process”

Leave a Comment